My Skyline, the story so far … (part nine)

So now that the Skyline had a different look what was next? More seat time? Don’t be silly! I could have and SHOULD have got myself booked onto another drift day at Pod but partly because it was at the time of year when Santa Pod stop all DWYB days in favour of the various car shows they hold, and partly because my tiny brain was listening to every man and his dog about “what my car needed next”.

Over the course of a few months until Santa Pod reinstated the DWYB days I started buying and fitting various adjustable arms starting with front adjustable camber arms (I didn’t need these as I already had enough camber on the front from the extended Lower control arms) because I felt I needed more control over how much camber I was running.

I added adjustable camber arms to the rear, I did need these as being a low powered car I needed to reduce the amount of grip on the rear to help it break traction.

Finally I replaced the already good enough extended front LCA’s with adjustable LCA’s (big mistake!!) at the time I thought I was doing myself a favour, now I realise I wasn’t I was simply making life harder for myself. After all this faffing around I got the car professionally aligned and everything was fine for a time.

While I was making these changes I was keeping an eye out online for a GTR bonnet (hood if you’re from ‘Merica) as I knew they were lighter than the GTS version and I also really like the look of them. One day, I got a message from a friend with a link to one for sale on Ebay and for really cheap! Whats more it was only an hours drive from where I lived, so I had to have it!

It had already been modified with Nismo style vents and at least from the photos looked like it had been done well. The problem was how was I going to get it home? I didn’t have a van, or anything that could transport it, so with a lot of rope and some knot tieing my cub scout leader would have been proud of I ended up driving home in the dead of night with the GTR bonnet strapped to the existing bonnet of my car.

Sadly the cold light of day revealed that the bonnet modifications weren’t as well executed as first thought. The hole sadly looked like it had been cut with a butter knife and the edges of the vent panel hadn’t been trimmed down at all. Still I fitted it to the car anyway with a view to tidying it up later.

However, it appeared that the universe had other ideas, while cleaning the car at the jet wash one day I found yet another poor execution on the offending bonnet… the paintwork! As I was spraying away with the jet wash hose I noticed that the paint was coming away in large chunks to reveal not one, but two colours underneath!

So the decision was taken to remove the GTR bonnet and replace the GTS bonnet for the time being.